User's Manual

CellComSL Series Universal Communicator Installation and Programming Guide Digital Monitoring Products
23
z-wave setup
17.4 STATUS of Z-Wave Devices
1. AccesstheUserMenu.
2. PressCOMMANDuntilZWAVESETUP?displays.
3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
4. SelectLISTtodisplayDEVICELISTandtherstZ-Wavedevicestored.PresstheCOMMANDkeytoadvance
through the list of Z-Wavedevices.
5. PressanySelectkeytodisplayDEVICERENAMESTATUS.
6. SelectSTATUStoconrmradiocommunicationwiththeZ-Wavedevice.
7. ThedevicenameandOKAYdisplayswhenthedevicestoredinthesystemcommunicates.
8. PresstheCOMMANDkeytoreturntothedevicelistanddisplaythenextdeviceinthelist.
9. Ifthedevicestoredinthesystemdoesnotcommunicate,thedevicenameandFAILEDdisplays.Pressthe
COMMANDkeyandREMOVEFAILEDDEVICEdisplays.
10. SelectYEStoremovethefaileddevicefromthesystemmemory.SelectNOtoleavethedeviceinthesystem
memory and to return to the device list.
11. Whenthedevicehasbeenremoved,thedevicenameandREMOVEDisdisplayedandthesystemnolonger
tries to communicate with the Z-Wavedevice.
17.5 Remove Z-Wave Devices (REMOVE)
EachZ-Wavedeviceaddedtoyoursystemremainsinyoursystemunlessitisremoved.Thisoptionallowsyouto
remove Z-Wavedevicesfromyoursystem.
1. AccesstheUserMenu.
2. PressCOMMANDuntilZWAVESETUP?displays.
3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
4. SelectREMOVE.PROCESSINGmaybrieydisplay.WhenPRESSBUTTONONDEVICETOREMOVEdisplayspress
the program button on the Z-Wavedevice,thedevicenameandREMOVEDisdisplayedtoindicatethe
Z-Wavedevicehasbeenremoved.
17.6 Favorites (FAV)
Z-WavedevicescanbegroupedtogethertocreateaFavorite.Thisoptionallowsyoutoprogramupto20
FavoritesinyoursystemandthenADD,EDITORREMOVEupto25Z-WavedevicesinaFavorite.Whenactivated
fromtheFAVORITEusermenu,acommandissenttoitsZ-WaveDevices.AFavoritecanonlybeactivated,or
turnedon.AseparateFavoritemustbecreatedtochangetheconditionssetbytherstFavorite.Forexample,a
Favoritecalled“MovieNight”couldlocktheexteriordoors,closethegaragedoor,adjustthetemperature,and
dimthelightsinthefamilyroomtothedesiredlevel.AnotherFavoritecalled“Wakeup”couldthenturnonthe
lights,adjustthetemperature,unlocktheexteriordoors,andraisethegaragedoors.
17.7 Adding a FAVORITE
1. AccesstheUserMenu.
2. PressCOMMANDuntilZWAVESETUP?displays.
3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
4. PressCOMMANDagaintodisplayFAVXFEROPT.SelectFAVandFAVORITENUMBER:-isdisplayed.
5. EnteraFavoritenumberbetween1and20andpressCOMMAND.IftheFavorite number entered is
unassigned,*UNUSED*displays.IftheFavoriteisalreadyassigned,youmaychangethenameorpressthe
backarrowandenteranewnumber.
6. PressanySelectkeyandacursordisplays.EnteraFavorite name up to 16 characters. To remove a Favorite,
press Command without entering a name.
7. PressCOMMANDtosavetheFavorite and the FavoritenameandADDEDITREMOVEdisplays.