User's Manual

Digital Monitoring Products CellComSL Series Universal Communicator Installation and Programming Guide
30
Appendix
18.8 Remote Arming/Disarming for Ademco Vista Control Panels
ThefollowingstepsdescribehowtoconguretheCellComSLtoarmanddisarmanAdemcoVistacontrolpanelfrom
ascheduleorremotelyfromtheVirtualKeypadApp,VirtualKeypadBrowser,MyAccess™,orRemoteLink™, using the
RemoteArmingOutput.SeeFigure17:AdemcoVista20PtoCellComSL.
1. Locateoutput17ontheAdemcocontrolpanel(farleftpinonthe7pinheaderlocatedinthemiddleofthePCB).
Connectoutput17toZone1(Z1)ontheCellComSL.Connecta1kohmEOLresistorfromZone1toground(G).
2. ConnectOutput1(O1)ontheCellComSLtoZone3(terminal12)ontheVistacontrolpanel.
3. OntheVistacontrolpanel,enterprogrammingbyenteringtheInstallerCodefollowedby800.Press*andField?
displays.
4. ProgramZone3asanArmingZone.Enter56andprogramthefollowing:
a. SettoConrm?-Enter0.
 b. EnterZnNum.-Enter03,press*tocontinue.
 c. SummaryScreen:ZnZTPRCHW:RT-Press*tocontinue.
 d. ZoneType-Enter77,press*tocontinue.
 e. ReportCode1st012nd0010-Press*tocontinue.
 f. HardwareType-Enter0,press*tocontinue.
 f. RespTime-Enter1,press*tocontinue.
 g. SummaryScreen:ZnZTPRCHW:RT-Press*tocontinue.
 h. ProgramAlpha-Enter0.
 i. EnterZNNumdisplays,enter00toexit.
5. ProgramOutput17.Enter*or#displays.Press*andField?displays.Enter79andprogramthefollowing:
a. EnterOutputNo-Enter17,press*tocontinue.
 b. OutputNormallyLow-Enter0,press*tocontinue.
 c. EnterOutputNodisplays.Enter00toexit.
6. DeneOutput17actions.Enter*or#displays.Press*andField?displays.Enter80andprogramthefollowing:
a. ProgramOutput17toturnonwhenarmedStay.OutputFunct#-Enter01,press*tocontinue.
• SummaryScreen:01AEPTrig-Press*tocontinue.
• Activatedby:-Enter2,press*tocontinue.
• EnterZnType-Enter20,press*tocontinue.
• OutputAction-Enter2,press*tocontinue.
• EnterOutputNo.-Enter17,press*tocontinue.
• SummaryScreen:01AEPTrig-Press*tocontinue.
 b. ProgramOutput17toturnonwhenarmedAway.OutputFunct#-Enter02,press*tocontinue.
• SummaryScreen:02AEPTrig-Press*tocontinue.
• Activatedby:-Enter2,press*tocontinue.
• EnterZnType-Enter21,press*tocontinue.
• OutputAction-Enter2,press*tocontinue.
• EnterOutputNo.-Enter17,press*tocontinue.
• SummaryScreen:02AEPTrig-Press*tocontinue.
 c. ProgramOutput17toturnoffwhenDisarmed.OutputFunct#-Enter03,press*tocontinue.
• SummaryScreen:03AEPTrig-Press*tocontinue.
• Activatedby:-Enter2,press*tocontinue.
• EnterZnType-Enter22,press*tocontinue.
• OutputAction-Enter0,press*tocontinue.
• EnterOutputNo.-Enter17,press*tocontinue.
• SummaryScreen:03AEPTrig-Press*tocontinue.
 d. OutputFunct#-Enter00,press*tocontinue.
7. Enter*or#displays.Press*andField?displays.Enter99toexitprogramming.
8. ProgrammingtheCellComSL.
a. ResettheCellComSL.Enter6653.
 b. PressCMDtoOutputOptions.Pressanyselectkey(toprowkey).
 c. ProgramOutput1inRemoteArmingOutput.PressCMDtoRMTARMGOUT:.Enter1CMD.
 d. PressCMDtoZoneInformation.PressanyselectkeyandZoneNo.-displays.
 e. Enter1,pressCMD.
 f. Enterazonename.PressCMD.
 g. ProgramZone1asanArmingZone.ZoneType:-displays.ChooseArmingZonetypeAR.PressCMD.
 h. Area:1------displays.PressCMD.
 i. Style:TOGGLEdisplays.ChooseMNT.
 j. ExitProgramming.