Programming Guide

1168 CO/Smoke Combo Unit Installation and Programming Guide 11
INSTALL THE 1168
MOUNT THE BASE
After selecting a location, mount the 1168 on a flat wall or ceiling. The ensure optimum
performance, mount the 1168 away from large metal objects. See Mounting Guidelines
for more information.
1. Grasp the detector and twist counterclockwise to remove the detector from
the mounting base. See Figure 2.
2. Use the supplied screws and anchors to mount the base to the surface. See
Figure3.
1
Figure 2: Remove
Detector from Base
Figure 3: Mounting
Hole Locations
Mounting Hole
Mounting Hole