Programming Guide
Table Of Contents
1168 CO/Smoke Combo Unit Installation and Programming Guide 17
Figure 5: Smoke Detector Placement Locations
TEST THE 1168
SMOKE TEST
1. Press the Smoke Test button on the 1168.
2. Hold a container of canned smoke close to the smoke entry openings.
3. Spray the smoke directly into the detector for 20seconds or until the 1168 goes
into alarm.
CO TEST
1. Press the CO Test button on the 1168.
2. Hold a container of Solo C6 CO Detector Tester (or similar) close to the CO Gas
Port.
3. Spray the can directly into the detector for 20seconds or until the 1168 goes into
alarm.