Programming Guide

1168 CO/Smoke Combo Unit Installation and Programming Guide 4
FIRE BELL OUT
Default is 0. Press CMD.
NEXT ZONE
At the NEXT ZONE? prompt, select NO.
WIRELESS
At the WIRELESS? prompt, select YES.
Note: If you are programming the 1168 onto a zone that
can be either hardwired or wireless, then this prompt
appears. If the zone you are programming is wireless-only,
then the prompt does not appear.
SERIAL NUMBER
Enter the eight-digit SERIAL #: - found on the device and press
CMD.
CONTACT NUMBER
Enter the contact number as 1 and press CMD.
CONTACT TYPE
Enter the CONTACT type as FIRE and press CMD.
FIRE BEL OUT: 0
NEXT ZONE? NO YES
WIRELESS? YES
TRANSMITTER
SERIAL #: -
CONTACT: 1
CONTACT: FIRE