Programming Guide

Digital Monitoring Products, Inc. | 1134 Installation and Programming Guide 15
PROGRAM THE 1134 OPTIONS
When you program the 1134, you can use a keypad connected to the 1134 programming header and
set to address 1. For 12V applications, connect the keypad to the module using a Model 330 4-wire
harness. For 24V applications, connect the keypad to the module using a Model 330-24 4-wire
programming harness with in-line resistor.
Do not connect a keypad using a standard Model 330 harness if using a 24V power supply!
Damage to the keypad could occur.
While the 1134 is in programming mode, it will not be able to communicate with the panel.
PROGRAM START DISPLAY
When you connect the keypad to the 1134 module, the version number
and release date display. Press CMD to enter the PROGRAMMER
menu.
SERIAL NUMBER DISPLAY
View the serial numbers for the 1134. The 1134 has a Type14 and
Type08 serial number. Press CMD to view the second serial number.
INITIALIZATION OPTION
These options can set the 1134 module programming memory back to
factory defaults. Press any select key or area to enter the Initialization
menu.
1134 PROGRAMMING
VER VVV MM/DD/YY
SERIAL#:XXXXXXXX
INITIALIZE ALL?
NO YES