Programming Guide

1132 Installation and Programming Guide | Digital Monitoring Products 1
GET STARTED
The 1132 is a wireless recessed contact that provides concealed protection for doors, windows, or any other
application needing a discreet solution. As with all DMP 1100 Series transmitters, the onboard LED provides built‑in
survey capability to allow for single‑person installations, eliminating the requirement for an external survey kit. The
1132 transmits Normal, Alarm, and Low Battery conditions.
What’s Included
▶ One 1132 Transmitter
▶ One Magnet
▶ One 3.6V Lithium 1/2 AA Battery
What You’ll Need
▶ 3/4” Drill Bit
▶ #1 Phillips screwdriver
Procedure
To install an 1132, this guide walks you through these required steps:
1. Program the panel.
2. Install the battery.
3. Select a location.
4. Mount the transmitter and magnet.
5. Test the transmitter.