User`s guide
20 XR150/XR350/XR550 User Guide Arming and Disarming
Home/Sleep/Away and Home/Sleep/Away with
Guest System Arming
Area Assignment: Your security system is divided into two or three
separate areas. Motion detectors, inside doors, and other interior
devices are assigned to an Interior and Bedroom areas while
windows and exterior doors are assigned to a Perimeter area.
Arming the system: When arming a Home/Sleep/Away or a Home/
Sleep/Away with Guest system, the keypad displays HOME AWAY
orHOMESLEEPAWAY.IfyouselectAWAY,youarmallareasofthe
system. You will want to arm all areas when leaving with nobody
staying inside. Selecting HOME arms only the Perimeter of the
system. Perimeter arming is when you are staying inside but want
the comfort of knowing the exterior doors and windows are armed.
Perimeter arming allows you to move freely about inside without
setting off any interior alarms. Selecting SLEEP arms the Perimeter
and Interior devices but leaves devices near bedrooms or other
nighttime areas off.
System Ready/System Not Ready Keypad
Displays
When all zones in the system are in a normal condition and can
be armed without bypassing, the keypad displays SYSTEM READY.
Ifthereareoneormorezonesthatarenotinanormalcondition,
the keypad displays SYSTEM NOT READY. Pressing any top row
Select key during this display shows the zone number and name
allowing you to investigate the problem.
Home/Sleep/Away and Home/Sleep/Away
with Guest Shortcut Key Arming
Arm Home — Press 3 for 2 seconds to arm the perimeter.
Arm Sleep — Press 7 for 2 seconds to arm the perimeter and
interior areas and leave the bedroom area off.
Arm Away — Press 1 for 2 seconds.
Arming a Home/Sleep/Away or a Home/Sleep/
Away with Guest System
1. Enter your 4-digit user code. The keypad displays
HOMESLEEPAWAY.
2. SelectHOMEtoarmthePerimeteronly.
3. Select SLEEP to arm the Perimeter and Interior.
4. Select AWAY to arm the Perimeter, Interior, and Bedroom.
5. The system displays any Bypassed zonesor faulted 24-hour
orPriorityzones.AfaultedPriorityzonecannotbearmed.
6.
Atthispointyoucanforcearmorbypassanyfaultedzones.
Azonethatisforcearmedwillberestoredintothesystemif
itlaterreturnstonormal.Azonethatisbypassedwillremain
bypasseduntilthesystemisdisarmed.See6athrough6d.
6a. Ifaproblemexistsonazone,thezonenameandproblemis
shownfollowedbyOKAYBYPASSSTOP.
6b. SelectOKAYtoforcearmthezone(s)beforearming.
6c. SelectBYPASStobypassthezone(s)beforearming.
6d. SelectSTOPtostopthesystemfromarming.Correctthezone
problem(s)andreturntostep1.
7. A Home/Sleep/Away system keypad displays HOME SYSTEM
ONifyouselectedHOME,SLEEPSYSTEMONifyouselected
SLEEP,andALLSYSTEMONifyouselectedAWAY.
A Home/Sleep/Away with Guest system keypad displays
HOMEGUEST1(or2)ONifyouselectedHOME,SLEEPGUEST
1(or2)ONifyouselectedSLEEP,andALLGUEST1(or2)ON