User`s guide
28 XR150/XR350/XR550 User Guide User Menu
Z-Wave Setup
YoursystemmayincludeaDMPZ-Wavecontrollermoduleattached
at installation. The Z-Wave controller module allows short range
radio control of Z-Wave devices that you or your installation
company may provide such as lighting control modules, thermostat
controls, and door locks. Z-Wave Setup allows you to program
the system to control the Z-Wavedevices.Youmaycontrol your
Z-Wave devices from your iPhone/iPad or Android device using
theDMP VirtualKeypad Apporfromyourkeypad byactivating a
Favorite from the Favorites User Menu.
Note:OutputsOn Off must be enabledintheprole assigned to
the user to access Z-Wave Setup. See User Proles in the
User Menu.
The available setup options are: Add, List, Remove, Favorites,
Transfer and Rediscover.
• SelectADDtoaddaZ-Wavedevicetoyoursystem.
• SelectLISTtodisplayalistofZ-Wavedevicesalreadyadded
and stored in your system.
• SelectREMOVEtocompletelyremoveaZ-Wavedevicefrom
your system.
• SelectFAVtoAdd,EditorRemoveaFavorite.
• Select XFER to transfer Z-Wave device information from
another manufacturer’s portable Z-Wave controller to your
system.
• Select REDISC to require your system to rediscover and
conrmradio communication withall of theaddedZ-Wave
devices.
Add Z-Wave Devices (ADD)
ThisoptionallowsyoutoADDaZ-Wavedevicetoyoursystem.Once
added, a Z-WavedevicemaybeassignedtoaFavorite.
1. Access the User Menu.
2. Press COMMANDuntilZWAVESETUP?displays.
3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
4. Select ADD. PROCESSING may briey display. When PRESS
BUTTONONDEVICETOADDdisplayspresstheprogrambutton
on the Z-Wavedevice.SeetheZ-Wavedevice’sdocumentation
for more information.
5. When the device information is received by the system, the
keypadbeepsonceanddisplaysDEVICEFOUND.
6. Onceadded,thekeypaddisplaysthetypeofdeviceandthe
default device name. Press COMMAND.
7. PressanytoprowSelectkeyandenteruptoa16character
custom name for the device. See Entering Names in
Appendix D.
8. Press the COMMANDkeytostorethenewname.
Note: A maximum of 232 Z-Wave devices can be added to the
system. When the maximum number of devices have been
added, the keypad displays ZWAVE TABLE FULL and no
additional Z-Wavedevicesmaybeadded withoutremoving
some existing devices.
List Z-Wave Devices (LIST)
This option allows you to edit the name of a Z-Wave device or
conrmradiocommunicationwiththeZ-Wavedevice.WhenLISTis
selected,therstZ-Wavedevicestoredinthesystemisdisplayed.
Remaining devices can be viewed by pressing the COMMAND key.
Lighting control modules,
are displayed rst, followed by
door
locks
and then
thermostat controls
.