User`s guide

50 XR150/XR350/XR550 User Guide User Menu
Fire Drill
FireDrillisusedtotesttherebellsorrehornsinyoursystem.
The Fire Drill test turns your system bell circuit on, but does not
send a message to the central station.
Starting a Fire Drill test
1. Access the User Menu.
2. Press COMMANDuntilFIREDRILL?displays.PressanySelect
key.
3. ThekeypaddisplaysSURE?YESNO.
4. Select YES to start the Fire Drill test.
Ending a Fire Drill test
1. Enter your code at the keypad and press COMMANDtoend
the Fire Drill.
2. The Fire Drill test automatically ends with ALARM SILENCE
or the programmed Bell Cutoff time.