User`s guide

XRSuper6 Appendix
The relay activates for five
seconds during which
you must open the door.
Once you open the door,
you have 40 seconds to
exit and close the door
before the zone 2 Soft-
Shunt expires.
Easy Entry™ User's Guide
This section of the user's guide provides information on using the Easy Entry™ access control capability of the security command
system. If your system is not currently using any access control devices, disregard this section. Easy Entry™ is built into every Security
Command system and can be accessed using Easy Entry™ keypads.
There are three different operating modes: Door Strike, Arming and Disarming, and Entry Delay. All of the examples below assume that
your system requires a user code to arm and disarm the
protection.
DOOR STRIKE
All/Perimeter Door Strike - From the Status List, present your
card to the reader. Once it is validated by the system, the Door
Strike relay activates. See Door Strike Relay Operation above.
Home/Away systems only activate the Door Strike relay when
arming and disarming.
ABC SECURITY
FRI 2:51 AM
POWER
While the keypad is in
the Status List, present
your access card.