User's Manual

Problem Possible causes What to do
The display on the front panel
does not light up.
Main cable is not connected. Check that the main cable is
plugged into the power socket.
No sound or picture, but the
front panel shows red light.
The DSR is in standby
mode.
Press the standby button.
No sound or picture. The satellite dish is not
pointing at the satellite.
Adjust the dish. Check the
signal level in the Antenna
Setup menu.
No signal or weak signal.
Check the cable connections,
LNB and other equipment
connected between the LNB
and the DSR, or adjust the
dish.
Bad picture / blocking error. The satellite dish is not
pointing at the satellite.
Adjust the dish.
Signal is too strong. Connect a signal attenuator to
the LNB input.
Satellite dish is too small. Change to a larger dish.
LNB noise factor too high. Change to an LNB with lower
noise factor.
The LNB is faulty. Change the LNB.
-43-
Trouble Shooting