User`s guide

Digital Rapids TouchStream
Page 23
 Documentation: These files have been included for reference. Some of
them contain advanced codec information that you will only need if you
are creating your own projects.
If you are familiar with the Digital Rapids Stream or Stream Live software you will
be able to close the TouchStream software on your unit (using ALT F4) and
launch the TouchStream Config software in order to launch a version of Stream
Live that will allow you to load and modify TouchStream projects. If you plan to do
this you should access the TouchStream unit using Windows Remote Desktop,
as the Stream Live software has not been designed to operate at the resolution
required by the touch screen interface. Note that even if you connect a monitor,
keyboard and mouse to the TouchStream unit you should not change the default
screen resolution as the touch screen only operates at a specific resolution, and
once it has been changed it is not easy to reset the resolution.
The files that are used by the TouchStream unit are located in the sub directories
of C:\Documents and Settings\All Users\Documents\Digital Rapids\Stream.
After using the TouchStream Config software you must exit from that application
before you will be able to launch the TouchStream software. To restart the
TouchStream software you can use the Start menu to choose Start > Programs >
Startup > TouchStream, or you can press the power switch and choose restart.
Keep in mind that if you add a file to the TouchStream unit you must restart the
TouchStream software in order to refresh the list that is shown by the
TouchStream interface. For example, if you add a graphic overlay to the Overlays
folder during a live broadcast, you will not be able to access that graphic while
that broadcast is in progress.
To restart the TouchStream software press the power switch and choose restart.