User`s guide

Digital Rapids TouchStream
Page 1
Safety Instructions
Before you operate this product you will need to make sure you follow certain
basic safety precautions.
CAUTION
Servicing of a chassis sub-assembly shall be performed only by technically
qualified persons.
Follow these guidelines to meet and maintain safety and product regulatory
requirements.
Read and adhere to all of these instructions and the instructions supplied with
this assembly. If you do not follow these instructions, the UL listing and other
regulatory approvals will be void, and the product will most likely be non-
compliant with regional product laws and regulations.
Use Only for Intended Applications
WARNING: This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
This product was evaluated as Class A - Information Technology Equipment
(ITE) that may be installed in offices, schools, computer rooms and similar
locations. The suitability of this product for other Product Categories and
Environments other than ITE applications, (such as medical, industrial, alarm
systems, and test equipment) may require further evaluation.
When you operate this product observe all warnings and cautions in the User‘s
Guide.
To avoid injury, be careful of:
 Sharp pins on connectors
 Sharp pins on printed circuit assemblies
 Rough edges and sharp corners on the chassis
 Hot components (like processors, voltage regulators, and heat sinks)
 Damage to wires that could cause a short circuit
 Pinched fingers when changing the angle of the front panel display
 Moving fan blades intended for cooling