Operating instructions

G3 Series Controls and operation
Material hold-down
4-43
000010,06,02-2009, jmu
4
Check the range
⇨ Use the key to change to the menu
Hold down functions 3-1
⇨ Change to the submenu
Vacuum range 3-1-1-7
⇨ Select the function
Move to vacuum 3-1-1-7-4
⇨ Choose OK to confirm
✓ The active module moves to the defined vacuum width
4.7.3 Setting the strength
⇨ Use the key to change to the menu Hold down functions 3-1
⇨ Change to the submenu
Vacuum 3-1-1
⇨ Select the function
Power level 3-1-1-5
⇨ Enter the required power level and confirm using OK
4.7.4 Switching on/off
⇨ Use the key to change to the menu Hold down functions 3-1
⇨ Change to the submenu
Vacuum 3-1-1
⇨ Select the function
Vacuum on/off 3-1-1-2
⇨ Choose OK to confirm