Operating instructions

Controls and operation G3 Series
Feeding options*
4-44
000010,06,02-2009, jmu
4
4.8 Feeding options*
The Zünd feed system allows the material to be processed to be transported on with
a conveyor belt following a completed work process.
The conveyor belt is gripped and fed using two clamping elements, while the material
to be processed is fixed with feeding clamps/a feed guide rail.
The arrangement and activation of the feeding clamps is determined based on the
material to be processed. If a feed guide rail is used then all feed elements are
activated/in fixed positions.
Depending on the size of the table or the material to be processed, an auxiliary drive
is used to support the bar during feeding. The feed direction is defined via the
position of the auxiliary drive.
Fig. 4-27 Feed direction - position of auxiliary drive