Operating instructions

G3 Series Controls and operation

Feeding options*

4-45

000010,06,02-2009, jmu

4.8.1 Feeding clamps

Fig. 4-28 Feeding clamp

Setting the feeding clamps

⇨ Loosen the screw for fixing the feeding clamp

⇨ Position the feeding clamp (pay attention to the hose length)

⇨ Tighten the screw for fixing the feeding clamp

Activating/deactivating feeding clamps

⇨ Turn the screw clockwise in order to deactivate the vacuum element

⇨ Turn the screw anti-clockwise roughly three rotations in order to activate the

vacuum element

1 Feeding clamp

2 Compressed air on/off

3 Hold-down of the feeding clamps