Operating instructions

Controls and operation G3 Series

Feeding options*

4-46

000010,06,02-2009, jmu

4.8.2 Feed guide rail

Fig. 4-29 Feed guide rail

Assemble feed guide rail

⇨ Use SHIFT to switch the cutter off

⇨ Loosen the fixing of the feeding clamps

⇨ Position the feeding clamps

⇨ Loosely screw the feeding guide rail to all feeding clamps using the supplied, self-

locking fastening screws

⇨ Tighten the fixing of the feeding clamps

⇨ Use to switch on the cutter

⇨Lower (1-7-11-6) and raise (1-7-11-7) the feeding guide rail several times for

inspection purposes

1 Fixing of the feeding clamp

2 Feed guide rail

3 Fastening screw, self-locking