Operating instructions

Controls and operation G3 Series
Automatic tool initialisation
4-50
000010,06,02-2009, jmu
4
4.9.3 Initialisation
Example: Module 2; electrically oscillating tool
Fig. 4-32 Initialisation
⇨ Use the travel keys to move the module into the centre of the cutter
⇨ Remove the automatic tool initialisation from the holder and position it in the
guide on the table.
⇨ Press the tool initialisation to be planar on the cutting base
⇨Use
Auto init 1-1-1-2-2 to select the function for automatic initialisation
✓ The tool is positioned via the automatic tool initialisation and the initialisation
process is started. The value that is determined is saved for the specific tool.