Operating instructions

G3 Series Controls and operation
Laser pointer, reference point
4-53
000010,06,02-2009, jmu
4
4.10.3 Choose laser pointer as pointer type
Both the current tool and the laser pointer can optionally be defined as the pointer for
defining the reference point.
⇨ Select the function
Pointer type 1-5-2-1-1
⇨ Select the laser pointer
✓ The laser pointer has been selected and saved as the pointer
4.10.4 Define reference point
Example: Active tool = EOT, position: Tool 2-1
Fig. 4-35 Define reference point
⇨ Select the function Define reference 2-1-1-3
⇨ Use the travel keys to move to the required reference point on the working area.
Choose OK to confirm
✓ The reference point is saved for the duration of time that the cutter is switched
on. This reference point now applies as the start point for the material processing.