Operating instructions

Controls and operation G3 Series
Module carriage slot protective plate
4-54
000010,06,02-2009, jmu
4
4.11 Module carriage slot protective plate
Attention !
Risk of being crushed
The module carriage area is not monitored by safety devices.
• Do not reach into the active area of the cutter during operation
• Do not protect occupied slots with slot protective plates
On the one hand, the slot protective plate is used as a safety device, and on the other
it is used to protect a free module slot from contamination. Two slot protective plates
are supplied.
Fig. 4-36 Slot protective plate