Operating instructions

G3 Series Description of menu
General
5-1
000015,031,02-2009, jmu
5
5 Description of menu
Valid from firmware 1.40
5.1 General
The menu description contains all menu entries and commands. However, entries
which repeat periodically (module 1 - module 4) are only listed once.
Explanations on module/tool-specific menu entries can be found in the operating
manual of the respective module/tool insert.
Menu entries are displayed/faded out depending on the module/tool combination.
5.2 Menu structure
The settings for modules and tools are arranged as they are presented in reality.
Tools are used in a module (e.g. UM) and routers, knives, pens etc. are used in the
tools.
The following menus appear in the main menu:
Cutter setup
Module selection, Tool selection, Initialisation, General cutter settings
Job setup
Reference points, window
Functions
Vacuum, Components, Router option, Tests
User settings
User level, password
Communication settings
Processing software communication settings (front end) - Cutter
Operating unit
Language, function keys, date/time
System info settings
Information on the cutter, operating hours
Service
Update firmware