Operating instructions

G3 Series Description of menu
Description of menu
5-5
000015,031,02-2009, jmu
5
Fig. 5-3 Init height
⇨ Select function
⇨ Use the travel keys to move to the suction height and confirm the dialogue using
OK
1807
1-1-1-3 Tool setup
No help text is available fo r this menu.
Tool-specific settings. These settings are saved for the assigned tool.
3059
1-1-1-3-1 Setup
No help text is available fo r this menu.
Tool-specific settings
2139
1-1-1-3-1-1 Tool connector
Determining the connectio n for a tool.No plugConnectio n 1Connectio n 2Connectio n 3Connectio n 4Connectio n 5
Determining the connection of the tool
2636
1-1-1-3-1-1 Router converter
Assign the connected router converterNoneConverter 1Converter 2
Assign the connected router converter
3339
1-1-1-3-1-1 Infeed angle
No help text is available fo r this paramet er.0°15°22.5°30 °45°
Setting of the infeed angle for the VCT.
The selection of the infeed angle ensures that the blade automatically penetrates into
the material at the correct angle. The penetration point can be optimised using the
functions X-correction/Y-correction (see section "2.10, X-/Y-correction"). The X/Y
correction value depends on the infeed angle and is selected automatically.
2142
1-1-1-3-1-2 Switch-off time
The tool switches off after a specified peri od of tim e without t he receipt o f data
The tool switches off after a specified period of time without the receipt of data
2193
1-1-1-3-1-3 Rpm
Setting of the motor spindle speed. The adjustable speed is depen dent on the spin dle type.FASTSLOW
Setting of the motor spindle speed. The adjustable speed is dependent on the spin-
dle type.
2140
1-1-1-3-1-4 After on delay
Waiting t ime until the tool has reach ed the nominal fr equency
Waiting time until the tool has reached the nominal frequency
2141
1-1-1-3-1-5 After off delay
Waiting tim e until the tool stand s still.
Waiting time until the tool stands still.
3129
24