Operating instructions

Description of menu G3 Series
Description of menu
5-14
000015,031,02-2009, jmu
5
Not active
2662
1-1-2 Tool pos. 2
No help tex t is available for this menu.
Fig. 5-7 Tool slot, tool assignment e.g. Module 2, tool 1
Each module consists of up to four tools (e.g. PUM). The first figure of the menu entry
shows the tool slot of the module, the second figure shows the tool position.
The menu entries of the tools 11 - 14; 21 - 24; 31 - 34; (41 - 44)* are identical.
The allocations and settings of the tools are carried out in the following submenus.
1-1-3 Tool pos. 3
No help tex t is available for this menu.
Fig. 5-8 Tool slot, tool assignment e.g. Module 2, tool 1
1 Module 2 (UM) = tool slot 2
= Tool pos. 1
2 Oscillating tool = tool 1
1 Module 2 (UM) = tool slot 2
= Tool pos 1
2 Oscillating tool = tool 1