Operating instructions

G3 Series Description of menu
Description of menu
5-17
000015,031,02-2009, jmu
5
Fig. 5-12 Tool slot, tool assignment e.g. Module 2, tool 1
Each module consists of up to four tools (e.g. PUM). The first figure of the menu entry
shows the tool slot of the module, the second figure shows the tool position.
The menu entries of the tools 11 - 14; 21 - 24; 31 - 34; (41 - 44)* are identical.
The allocations and settings of the tools are carried out in the following submenus.
1-3-2 Tool pos 2
No help text is available fo r this menu.
See tool pos 1
1-3-3 Tool pos 3
No help text is available fo r this menu.
See tool pos 1
1-4 Module 4
No help text is available fo r this menu.
Menu with settings for module 4 (optional)
1 Module 2 (UM) = tool slot 2
= Tool pos. 1
2 Oscillating tool = tool 1