Operating instructions

G3 Series Description of menu
Description of menu
5-19
000015,031,02-2009, jmu
5
1-4-3 Tool pos. 3
No help text is available fo r this menu.
See tool pos 1
1-5 Module carriage
No help text is available fo r this menu.
Settings on the module carriage.
• Change module
• ICC Camera
• Laser pointer settings
3040
1-5-1 Change module
This func tion must be called up if a module ne eds to be installed, dismantled or changed on the module carriage.
Procedure for changing the module. See "Modules" section
2892
1-5-2 Sensor/Camera
No help text is available fo r this menu.
Settings for the laser pointer, ICC camera
2356
1-5-2-1 Laser pointer settings
Set which module displays th e reference point.
The laser pointer is an optical instrument for visually determining the reference point.
The reference point (starting point) corresponds to the zero point in the coordinate
system of the job file. See chapter "Controls and operation", "Laser pointer, reference
point"
2357
1-5-2-1-1 Pointer type
No help text is available fo r this paramet er.ToolPointer
Both the current tool and the laser pointer can optionally be defined as the pointer for
defining the reference point.
⇨ Select the pointer or tool and confirm with OK.
✓ The setting is saved
2895
1-5-2-2 Camera light options
No help text is available fo r this menu.
Switching camera lighting on/off
1800
1-5-3 Manual move settings
No help text is available fo r this menu.
Setting of the speed and acceleration for the procedure using the travel keys on the
operating unit.
1941
1-5-3-1 Up X&Y speed
No help text is available fo r this paramet er.
Moving speed when the tool is raised.
Adjusting value: 1 - 1000 mm/s
1940
1-5-3-2 Down X&Y speed
No help text is available fo r this paramet er.
Moving speed when the tool is lowered.
Adjusting value: 1 - 1000 mm/s
1939
1-5-3-3 Normal X&Y accel
No help text is available fo r this paramet er.
Acceleration without activated SHIFT key
Setting in m/s
2
1938
1-5-3-4 Fast X&Y accel
No help text is available fo r this paramet er.
Acceleration with activated SHIFT key
Setting in m/s
2
2914
1-5-4 Active tool