Operating instructions

G3 Series Description of menu
Description of menu
5-21
000015,031,02-2009, jmu
5
1-6 Table
No help text is available fo r this menu.
General table settings
2498
1-6-1 Park options
No help text is available fo r this menu.
The parking function is linked to the HP-GL command "PK" in the ONLINE operating
status. If this command is triggered, the module carriage moves to the park position.
The keys on the operating unit (other than keys 1 - 3) are blocked. Using
Exit park 1-
6-1-1-3, the module carriage moves to the initialisation point and the ONLINE
operating status is activated.
The park position settings of the module carriage and the options during the park
function are carried out in this menu.
The park command positions the module carriage at a particular point on the work
surface in order to be able to carry out settings work or loading and unloading without
disruption.
If the park function is active, only functions from the submenu
Park options 1-6-1-1
can be performed.
2492
1-6-1-1 Park pump functions
No help text is available fo r this menu.
Functions while the module carriage is in park position.
2494
1-6-1-1-1 Vacuum off
Automatic ini tialisation wit h AKI
Vacuum is switched on. Use to switch the vacuum off
2493
1-6-1-1-1 Vacuum on
Automatic ini tialisation wit h AKI
Vacuum is switched off. Use to switch the vacuum on
2495
1-6-1-1-2 Blow
Automatic ini tialisation wit h AKI
Suction function is active. Use to switch to blowing
2496
1-6-1-1-2 Suction
Automatic ini tialisation wit h AKI
Blowing function is active. Use to switch to suction
2497
1-6-1-1-3 Exit park
Automatic ini tialisation wit h AKI
Important !
The module carriage automatically moves to the zero position. The ONLINE
operating status is activated.
Exit park
2502
1-6-1-2 Move to park position
Automatic ini tialisation wit h AKIMove head out of the operating area?Move to park position...
The module carriage moves to the defined park position.
2501
1-6-1-3 Park position mode
No help text is available fo r this paramet er.X and YOnly XOnly Y
Definition of which park position is to be moved to.
The following modes are available:
2499
24
Axis Description
X axis The module carriage moves to
park position X
Y axis The module carriage moves to park position Y
X/Y axis The module carriage moves to park position X/Y