Operating instructions

Description of menu G3 Series
Description of menu
5-22
000015,031,02-2009, jmu
5
1-6-1-4 X park pos
Position after th e cutter starts a nd stand-by pos ition.
Definition of the X coordinates of the park position
2500
1-6-1-5 Y park pos
Position after th e cutter starts a nd stand-by pos ition.
Definition of the Y coordinates of the park position
2470
1-6-2 Light barrier options
No help tex t is available for this menu.
Warning !
Risk of injury caused by non-activation of safety devices
The light barriers are part of the safety device!
• only deactivate the light barriers for installation purposes at Zünd
• before delivery, activate the light barriers and check that they function
Fig. 5-15 Light barrier options
Menu for activating/deactivating the light barriers
3187
1-6-2-5 Test
No help tex t is available for this menu.
Warning !
Risk of injury due to safety devices not functioning/being switched off.
• Never put the machine into operation if the safety devices are not working.
• Check the function of the safety devices in accordance with the maintenance
schedule.
Functions for testing the individual light barriers.
1 Front light barrier
2 Back light barrier
3 Reflex light barrier