Operating instructions

Description of menu G3 Series
Description of menu
5-24
000015,031,02-2009, jmu
5
• Normal: The material is fed in from the back and removed from the front.
• Bidirect 1: The material is fed and removed on the same side.
• Bidirect 2: The material is fed and removed on the same side. This process is car-
ried out alternately once at the front and once at the back.
2803
1-7-1-8 Feed comp.
Value to c ompensate for slip page duri ng the page feed.
Value for the compensation of the material-dependent track during a feed cycle in
mm.
1-7-1-13 Ext. Stop
No help tex t is available for this parameter.
InactiveActive
Feed stop, which is triggered by an external signal.
1-7-1-14 Mat. smooth
No help tex t is available for this menu.
Description to follow
2570
1-7-1-14-1 Material smooth
Activate material s mooth.Off
On
Description to follow
2862
1-7-3 Driven unwind options
No help tex t is available for this menu.
Settings of the unwind unit with core uptake
3333
1-7-3-1 Unwinding unit core
No help tex t is available for this parameter.Of fOn
Activate/deactivate unwinding unit with core uptake
3308
1-7-3-2 Unwinding unit on
Automatic initialisation with AKI
Switch on unwinding unit
3309
1-7-3-2 Unwinding unit off
Automatic initialisation with AKI
Switch off unwinding unit
2866
1-7-4 Driven wind-up options
No help tex t is available for this menu.
Settings of the wind-up unit with core uptake
3334
1-7-4-1 Wind-up unit core
No help tex t is available for this parameter.Of fOn
Activate/deactivate wind-up unit with core uptake
3311
1-7-4-2 Wind-up unit on
Automatic initialisation with AKI
Switch on wind-up unit
3310
1-7-4-2 Wind-up unit off
Automatic initialisation with AKI
Switch off wind-up unit
3016
1-7-6 Aux drive 1
No help tex t is available for this menu.
Functions for the setting of auxiliary drive 1
3018
1-7-7 Aux drive 2
No help tex t is available for this menu.
Description to follow
3019
1-7-8 Aux drive 3
No help tex t is available for this menu.
Description to follow
Active The external signal is processed and the feed is stopped
Inactive The external signal will not be processed any further