Operating instructions

G3 Series Description of menu
Description of menu
5-25
000015,031,02-2009, jmu
5
2861
1-7-9 Unwind options
No help text is available fo r this menu.
Set universal unwinding unit
3338
1-7-9-1 Unwind options
No help text is available fo r this paramet er.OffOn
Switch universal unwinding unit on/off
1-7-9-2 Status
Bit 0: cmd done Bit 1: new cmd Bit 2: vector done Bit 3: new vect or Bit 4: error Bit 5 : no material Bit 6: she et feeder in position Bit 7: -
Bit 0: cmd done
Bit 1: new cmd
Bit 2: vector done
Bit 3: new vector
Bit 4: error
Bit 5: no material
Bit 6: sheet feeder in position
Bit 7: -
3676
1-7-9-3 Error
Bit 0: override Bit 1: -5 V Bit 2: +24 V Bit 3: +VMot Bit 4: min curre nt Bit 5: min dis tance Bit 6: polarity Bit 7: max current Bit 8: AD timeou t Bit 9: sourc e check Bit 10: Vref che ck Bit 11: H bridge check Bit 12: axis check Bit 13: H timeou t Bit 14: no material Bit 15: l sli ght Bit 16: zero mark Bit 17: no store Bit 18: no SPI sla ve Bit 19: emergenc y Bit 20: ee prom
Bit 0: override
Bit 1: -5 V
Bit 2: +24 V
Bit 3: +VMot
Bit 4: min current
Bit 5: min distance
Bit 6: polarity
Bit 7: max current
Bit 8: AD timeout
Bit 9: source check
Bit 10: Vref check
Bit 11: H bridge check
Bit 12: axis check
Bit 13: H timeout
Bit 14: no material
Bit 15: l slight
Bit 16: zero mark
Bit 17: no store
Bit 18: no SPI slave
Bit 19: emergency
Bit 20: eeprom
3678
1-7-9-4 Comm.error
Number of communi cation errors wh ich occur red on th e Universa l Board.
Number of communication errors which occurred on the Universal Board.
2556
1-7-11 Feeding clamps
No help text is available fo r this menu.
Settings for the feeding clamps
On Universal unwinding unit is active
Off Universal unwinding unit is not active