Operating instructions

Description of menu G3 Series
Description of menu
5-26
000015,031,02-2009, jmu
5
2558
1-7-11-2 Release mode
Loosen the feedi ng clamp with or without shakin g.NormalCountermov ement
Switching countermovement on/off
2559
1-7-11-3 Countermovement
No help tex t is available for this parameter.
During the feed, the bar moves the set path backwards in order to ensure that the
feeding clamps can be raised.
2594
1-7-11-6 Lower feeding clamps
Automatic initialisation with AKI
Feeding clamps are lowered to fix the material.
2595
1-7-11-6 Lift feeding clamps
Automatic initialisation with AKI
Raise feed elements
2560
1-7-12 Feeding bar
No help tex t is available for this menu.
Description to follow
3335
1-7-12-1 Feeding bar
No help tex t is available for this parameter.Of fOn
Description to follow
3313
1-7-12-2 Fix feeding bar
Automatic initialisation with AKI
Description to follow
3314
1-7-12-2 Release feeding bar
Automatic initialisation with AKI
Description to follow
2870
1-7-15 External device 1
No help tex t is available for this menu.
External auxiliary drive 1
2871
1-7-16 External device 2
No help tex t is available for this menu.
External auxiliary drive 2
2544
1-7-17 Misc feeding options
No help tex t is available for this menu.
Settings for the automatic material transport
3138
1-7-18 Manual feed table
No help tex t is available for this menu.
Functions for setting the manual feed table.
3139
1-7-18-1 Manual feed table
No help tex t is available for this parameter.Of fOn
Activate/deactivate the stop of the manual feed table.
3344
1-7-18-2 Raise stop
Automatic initialisation with AKI
Raise the stop
3345
1-7-18-2 Lower stop
Automatic initialisation with AKI
Lower the stop
3140
1-7-18-3-1 Up delay
No help tex t is available for this parameter.
Delay time before the lifting of the stop.
3141
1-7-18-3-2 Down delay
No help tex t is available for this parameter.
Delay time before the lowering of the stop.
3326
22