Operating instructions

G3 Series Description of menu
Description of menu
5-27
000015,031,02-2009, jmu
5
1-7-19 Fusion Feeder
No help text is available fo r this menu.
Description to follow
3336
1-7-19-1 Fusion Feeder
No help text is available fo r this paramet er.OffOn
Description to follow
3327
1-7-19-2 Board feeder on
Automatic ini tialisation wit h AKI
Description to follow
3328
1-7-19-2 Board feeder off
Automatic ini tialisation wit h AKI
Description to follow
2953
1-8 Hold down functions
No help text is available fo r this menu.
Setting the material hold-down. Depending on the application and the size of the
table, either a turbine vacuum generator or a gas ring vacuum generator is used to
generate the vacuum. See chapter "Controls and operation",
2545
1-8-2 Vacuum pump options
No help text is available fo r this menu.
Setting of the gas ring vacuum generator
2548
1-8-2-1 Status
No help text is available fo r this paramet er.OffOn
Activating/deactivating the vacuum generator
2546
1-8-2-2 After on delay
The delay after the pump has been switched on. This ensures that a vacuum is a vailable once the job proce ssing has been star ted.
Determines the interval between the switching on of the vacuum and the processing
of the job in ms. This ensures that a vacuum is available once the job processing has
been started.
2547
1-8-2-3 After off delay
The delay aft er the pump has been switc hed off. Prev ents the pump b eing switched on and off too quickly. Protec ts the relay cont acts.
Determines the period after the processing of the job until the switching off of the vac-
uum.
2549
1-8-2-4 Pump quantity
Pump con figuration . Select t he number of conne cted pumps.TwoOnly #1Only #2
Pump configuration. Selection of the connected pumps.
1-8-3 Vacuum range
No help text is available fo r this menu.
Setting of the vacuum width
See chapter "Controls and operation", "Material hold-down"
2342
1-8-3-1 Vacuum range
Current v acuum rang e.
For machines with continuously adjustable vacuum range.
2403
1-8-3-2 Define vacuum range
Set the vacuum range using the current module carriage position.Move the head to t he slide p osition and press OK in order to re set the slide position.Please wait.