Operating instructions

Description of menu G3 Series
Description of menu
5-30
000015,031,02-2009, jmu
5
2 Job setup
Main menu for the job settings.
Settings relating to the current job
1610
2-1 Reference point settings
No help tex t is available for this menu.
Two reference points (start points) can be defined on the work surface. The
reference point automatically determined by the machine during start-up is
deactivated following the activation of a reference point. See chapter "Controls and
operation", "Reference point"
2922
2-1-1 Ref point 1 options
No help tex t is available for this menu.
Set reference point 1
2321
2-1-1-1 Move to reference
Automatic initialisation with AKIMove to referen ce...
Position active tool at reference point 1
2389
2-1-1-2 Clear reference
Automatic initialisation with AKIPlease wait.
Clear reference
1997
2-1-1-3 Define reference
Use the travel k eys to move th e head to the refe rence position. If the head is in the requi red position then use this functi on comman d to define the re ference position.Move to the ref erence point a nd press OK in o rder to defin e it.
Use the travel keys to move to the required position and confirm using OK.
2-1-1-4 Current X reference
No help tex t is available for this parameter.
Display of the X coordinates of the reference point
1644
2-1-1-5 Current Y reference
No help tex t is available for this parameter.
Display of the Y coordinates of the reference point
1749
2-2 Scale settings
No help tex t is available for this menu.
Enlarge or reduce a job by the entered factor.
1750
2-2-1 X scale
No help tex t is available for this parameter.
Factor X direction
1751
2-2-2 Y scale
No help tex t is available for this parameter.
Zoom factor Y direction
1801
2-3 Output
No help tex t is available for this menu.
Menu item has no content.
1752
2-3-1 Circle res
Ratio bet ween strin g length and radi us.
Menu item has no content.
2203
2-3-2 String length
String length fo r the circle res.
Menu item has no content.
1883
2-4 Placement settings
No help tex t is available for this menu.
Settings for positioning a job.
1884
2-4-1 Rotation options
No help tex t is available for this menu.
Menu item has no content.
2404
2-4-1-1 Adjust angle
Setting the job rotation.Please wait.