Operating instructions

G3 Series Description of menu
Description of menu
5-31
000015,031,02-2009, jmu
5
Menu item has no content.
2-4-1-3 Define rotation centre
Determine the r otation centre of the job.Move into the rotation centre and press OK in order to define it.
Menu item has no content.
1617
2-4-1-4 Angle
No help text is available fo r this paramet er.
Menu item has no content.
1615
2-4-1-5 Centre X rotation
No help text is available fo r this paramet er.
Menu item has no content.
1616
2-4-1-6 Centre Y rotation
No help text is available fo r this paramet er.
Menu item has no content.
1885
2-4-2 Offset
No help text is available fo r this menu.
Move output in X/Y direction
1611
2-4-2-1 X Offset
No help text is available fo r this paramet er.
Value by which the output is moved in the X direction.
1614
2-4-2-2 Y Offset
No help text is available fo r this paramet er.
Value by which the output is moved in the Y direction.
1920
2-5 Buffer settings
No help text is available fo r this menu.
Buffer for the last job received in HPGL format.
1921
2-5-1 Clear buffer
Automatic ini tialisation wit h AKI
Clear buffer?
Clear buffer
2246
2-5-2 Start replot
Automatic ini tialisation wit h AKIRepeat pl ot?
The last job is carried out again.
1998
2-6 Window settings
Menus for defining the clipping window.
Limit the working area of the machine (clipping). All data that are inside/outside of
this window are ignored. Two windows can be defined independent of each other.
1999
2-6-1 Window 1 options
Definition of clipping window 1.
Define window 1
2000
2-6-1-1 Window settings
The window c an be activated or deactivate d here. If the win dow is activa ted then it is n ot possible for the defined limits to be e xceeded in eith er the ONLINE or the OFFLINE mode. If al l windows a re deacti vated then the maxim um workin g area of the plotter is used.OffOn
Switching window on/off.
If the window is deactivated, the maximum working area of the cutter is used.
If the window is activated, the defined limits cannot be exceeded in any operating
status.
2201
2-6-1-2 Safety zone
Defines whet her the blocke d zone of the clipping windo w lies outside or inside of the defined w indow.OutsideInside
Selection of whether the blocked area is inside or outside of the defined window.
• Inside: the area outside of the window is blocked
• Outside: the area inside of the window is blocked
2009
2-6-1-3 Define corner
Use the trav el keys and mo ve to the corne rs of the clip ping window.