Operating instructions

G3 Series Introduction
Legal notice
1-7
000009,04,02-2009, jmu
1
1.7 Legal notice
The information contained in this publication is intended for information purposes
only and is subject to change without notice at any time. This does not constitute an
obligation on the part of Zünd Systemtechnik AG.
No part of this document may be copied, distributed, used or disclosed to third parties
without express permission. Offenders will be liable for damages.
1.8 Troubleshooting, hints and tips
Important !
You can find information about troubleshooting and useful hints and tips on the Zünd
homepage. (www.zund.com)
1.9 Documented cutter models
This documentation applies for the following types of G3 series cutters.
1.10 Publishing details
Name
Operating manual for G3 series cutters, side-support version.
Composition, illustration and publication
Zünd Systemtechnik AG - Technical Editorial Department
©Copyright
Zünd Systemtechnik AG
G3 Series
M line L line XL line 2XL line 3XL line
M-1600 L-3200 XL-3200 2XL-3200 3XL-3200
M-2500 L-2500 XL-2500
XL-1600 2XL-1600 3XL-1600