Operating instructions

Description of menu G3 Series
Description of menu
5-40
000015,031,02-2009, jmu
5
Communication settings for Ethernet connections
3629
5-3-1 Tool connector
No help tex t is available for this parameter.
Entry of the communication port.
Default value =50000
3627
5-3-2 IP address
No help tex t is available for this parameter.
Display of the IP address
3628
5-3-3 IP template
No help tex t is available for this parameter.
Display of the IP template
3661
5-3-4 Unused
No help tex t is available for this parameter.
No function
2481
5-3 Logger
No help tex t is available for this menu.
software for reading the log data
2482
5-3-1 Log output
Direct output of the logging data on the interface.OffOn
Switch log output of the communication settings on/off
759
6 Panel
Menu for t he panel-specific settings such as language, volume , contrast and the allocation of the function k eys. All these s ettings are saved on the pa nel. If more tha n one panel is connected to a machine then each panel has its own settings.
Settings for the operating unit
1590
6-1 Language
No help tex t is available for this parameter.Engli shGermanFrenchSpanishItalian
You can set your user language in this submenu.
Select the required language. Choose OK to confirm.
2025
6-2 Volume
Volume of the pan el loudspeaker . 0 : Loudspeak er switched off 255: Maximum volume
Setting of the signal volume
⇨ Enter value for the volume
⇨Use
Save panel settings 6-8 to save the settings
2026
6-3 Panel contrast
Contrast of th e panel display. 0 : Bright displ ay 255: Dark d isplay
Setting of the contrast of the display
⇨ Enter value for the contrast
⇨Use
Save panel settings 6-8 to save the settings
2666
6-4 Length unit
No help tex t is available for this parameter.Me tricImpe rial
Setting of the measurement unit: US units/Si units
⇨ Select the required unit. Choose OK to confirm.
⇨Use
Save panel settings 6-8 to save the settings
2035
6-5 Function keys
This tab d isplays whi ch menu paths the function keys are a ssigned to .
Definition of the function keys (see chapter "Controls and operation", "Function
keys")
2619
6-6 Date format
No help tex t is available for this parameter.DD.M M.YYYYYYYY-MM-DDMM/DD/YYYY
Setting the date format
⇨ Select date format
⇨Use
Save panel settings 6-8 to save the settings