Operating instructions

Description of menu G3 Series
Description of menu
5-42
000015,031,02-2009, jmu
5
8 System info settings
No help tex t is available for this menu.
Display of general information about the cutter
2311
8-1 Table type
No help tex t is available for this parameter.PXNG3_L2500G3_M2500G3 _XL1600G3_ 2XL1600G3 _3XL1600
G3_L3200G3_XL3 200G3_2XL32 00G3_ 3XL3200
Display of the table type (e.g. L-2500)
2312
8-2 Table number
No help tex t is available for this parameter.
Display of table number
2313
8-3 Options
No help tex t is available for this parameter.
Installed options are displayed via a numerical code
2314
8-4 Serial number
No help tex t is available for this parameter.
Display of the serial number
3275
8-5 Software versions
No help tex t is available for this menu.
Displays the current version of the software
3276
8-5-1 MC
No help tex t is available for this parameter.
Description to follow
3277
8-5-2 Panel
No help tex t is available for this parameter.
Description to follow
2316
8-5-3 MC version
No help tex t is available for this parameter.
Display of the master controller version
3046
8-5-4 MC Build
No help tex t is available for this parameter.
Internal number
8-5-6 Panel build
No help tex t is available for this parameter.
Internal number
3278
8-5-7 YM board
No help tex t is available for this menu.
Software version of the Y board
8-5-8 Camera board
No help tex t is available for this menu.
Description to follow
8-5-9 Mod. board 1
No help tex t is available for this menu.
Description to follow
8-5-10 Mod. board 2
No help tex t is available for this menu.
Description to follow
8-5-11 Mod. board 3
No help tex t is available for this menu.
Description to follow
8-5-12 Mod. board 4
No help tex t is available for this menu.
Description to follow
8-6 Actual e-box temp
No help tex t is available for this parameter.