Operating instructions

Malfunctions G3 Series
Error messages
6-6
000012,03,02-2009, jmu
6
0x00009B03 The selected module is not supported.
You selected a mod ule that is not supported on this machine. Sel ect an ava ilable module and try again .
159
Cause
At the moment the selected tool module is still not supported. For example, an
attempt was made to change to module 4 even though module 4 is not available on
this machine.
Solution
Select valid module.
0x0000A402 CRC error during transfer.
No help av ailable
169
Cause
An error occurred during the examination of the checksum
Solution
Check communication
0x0000A603 HAL: An attempt was made to access an unknown HAL ID.
HAL file row number: %0s
An unknown HAL ID was used.
171
Contact service
0x0000A703 HAL: Attempt made to access an undeclared BusElement ID.
HAL file row number: %0s
A bus element ID which has not been declared was accessed.
172
Contact service
0x0000A902 Incompl HP-GL comm
Command %2s is incorrect.
The HP-GL command has too few/too many parameters.
174
Cause
The HP-GL command was called up with too few parameters
Solution
Check HP-GL Manual for the call.
0x0000AA02 Unknown XX command.
Cmd: %2s
No help av ailable
175
Contact service
0x0000AB02 HP-GL command not supported.
HP-GL command not currently supported.
176
Cause
This HP-GL command has not yet been implemented
0x0000B902 Unexpected error:
The Altera has already been configured.
No help av ailable
190
Contact service
0x0000BA04 Error when loading the Altera.
No help av ailable
191