Operating instructions

Malfunctions G3 Series
Error messages
6-12
000012,03,02-2009, jmu
6
Contact service
0x00014501 Operating status in the process of changing.
Wait until the status changes.
338
Contact service
0x00014B03 Incorrect sequencer status
Incorrect sequencer status for the command %0s.
344
Contact service
0x00014C03 Peripheral could not be entered into the list.
Remove a peripheral element t hat is no l onger needed.
345
Contact service
0x00014D02 Peripheral could not be found in the peripheral list.
Inform the man ufacturer of thi s error.
346
Contact service
0x00014E02 Incorrect tool type.
The tool is not s upported. Select valid tool typ e.
347
Cause
This tool type is not supported.
Solution
Select available tool
0x00014F03 Tool connection not available.
The tool conne ction is not a vailable. Selec t another conn ection.
348
Cause
An attempt was made to link a tool to a connection that is not available.
Solution
Select another port.
0x00015003 Tool timeout already active.
Remove al l tools fro m the modules an d try agai n. Please inform the manufacturer .
349
Contact service
0x00015102 No timeout job active.
No timeout jo b active for th is tool. Please inform t he manufacture r.
350
Contact service
0x00015201 Database successfully saved.
All stora ble datab ase para meters are persistently sa ved.
351
Contact service
0x00015304 Whole DB deleted.
The cutter must be restarted.
All saved database values ha ve been de leted from the pe rsistent database. The parameters a re loaded with the ir default values.
352
Contact service
0x00015401 System is in the operating status STOPPED.
Use operating u nit 1 to change to the operating status ONLINE or OFFLINE.
353