Operating instructions

Malfunctions G3 Series
Error messages
6-16
000012,03,02-2009, jmu
6
0x00018003 Distance outside of range.
Module chang e difference i s outside of the range. Error index = %0s .
398
Contact service
0x00018202 Initialisation module stopped.
Carry out reinitiali sation.
400
Cause
The initialisation of a module was interrupted. The head modules are set to an
uninitialised status and can no longer be moved.
Solution
The initial status can be reproduced by carrying out a reinitialisation of the head.
When confirming the error, the head is reinitialised to module 1.
0x00018302 Error when exporting the user log file.
No help av ailable
401
Contact service
0x00018402 Value is not a valid number.
402
Contact service
0x00018504 Timeout during start-up. No communication to the system.
No help av ailable
403
Contact service
0x00018602 Error when setting the axis position.
Error when se tting an axis to a defined p osition.
404
Contact service
0x00018701 Please wait.
No help av ailable
405
Cause
The user must wait until the function has terminated.
0x00018803 Error with the database trigger.
No help av ailable
408
Contact service
0x00018A03 Internal error:
No owner task.
Internal software error.
409
Contact service
0x00018B03 Error during access to the edge sensor.
No help av ailable
410
Contact service
0x00018C02 Reference point outside of the limits.
Not all mod ules can reach th e reference point .
411
Cause
The reference point was set outside of the travel range.
Solution
Authorise or move reference point