Operating instructions

G3 Series Malfunctions
Error messages
6-19
000012,03,02-2009, jmu
6
No help available
439
Contact service
0x0001A803 HAL: Unknown Altera string.
HAL file row number: %0s
No help available
440
Contact service
0x0001A903 HAL: It is not possible to configure a stop trigger at this Altera input.
HAL file row number: %0s
No help available
441
Contact service
0x0001AA03 HAL: Bit does not exist.
HAL file row number: %0s
No help available
442
Contact service
0x0001AB03 HAL: Insufficient bits available for the assigned function.
HAL file row number: %0s
No help available
443
Contact service
0x0001AC03 An error occurred when parsing the HAL file.
There seems to be a problem with the HAL file.
444
Contact service
0x0001AD03 Error in the status machine.
No help available
445
Contact service
0x0001AE02 Deletion failed. Tool is still assigned to a module.
No help available
446
Cause
An attempt was made to delete a tool, but the tool is still connected to a module and
therefore cannot be deleted.
Solution
The tool must first be removed from all modules.
0x0001AF01 A tool of this type and with this number already exists.
No help available
447
Cause
An attempt was made to attach a tool but the attempted combination of tool type and
tool number already exists.
0x0001B003 Collet is open. The router cannot be started.
No help available
448
Contact service
0x0001B102 Router still running, collet cannot be opened.
No help available
449
Contact service
0x0001B203 The router converter is currently already being used by another tool.
You have provided one router converter for two different routing tools. This error appears when an attempt is made to activate these two ro uting tools at th e same time.
450