Operating instructions

G3 Series Product description
Intended use
2-3
000003,04,02-2009, jmu
2
2.2.2 UL marking
Fig. 2-3 UL marking
2.3 Intended use
The cutter system can be used for the following purposes:
– As an output device for CAD/CAM data
– For processing and labelling materials arranged on the table
Aside from this, the intended use and the limits of the application are as follows:
– Depending on the tools and material feed system available,
– Described in the chapters "Tools", "Modules" and "Material transport".
1 UL marking (Canada, USA)
2 Voltage range
3 Max. current
4 Frequency