Operating instructions

Cleaning and maintenance G3 Series
Maintenance jobs
7-12
000001,07,12-2008, jmu
7
7.7.4 Clean the machine
Zünd cutters are production machines that are subject to enormous amounts of
stress on a daily basis. Keeping the machine clean will help to keep operation as free
from interruption as possible.
Important !
Do not use compressed air to clean the machine.
Loose cuttings and other dirt will end up in the bearings and drive belts and damage
them.
Attention !
Danger of damage
Incorrect cleaning products and methods will damage the machine
• Only use gentle cleaning agents and plastic maintenance products for cleaning.
• Never clean the tool using ultrasound, a steam jet, compressed air etc.
Procedure
• Clean the table, operating unit, all covers and panels with a plastic maintenance
product at regular intervals (weekly).
• Regularly (daily) remove all materials residues from the table, the tools and mo-
dules.
• Keep the environment clean (free from material residues, dust).