Operating instructions

G3 Series Product description
Modules, tools
2-5
000003,04,02-2009, jmu
2
2.5 Modules, tools
2.5.1 General
2.5.2 UM
Fig. 2-5 Modules - tool inserts - tools
1 Modules (UM/RM/PUM)
2 Tools (EOT/POT/DRT)
3 Module carriage
4 Router/knife/...
Modules
The use of modules and tool inserts means that Zünd
cutters can be highly specialised on the one hand,
whilst still being able to be easily converted for
processing other materials on the other hand.
As standard three modules can be fastened onto the
module carriage.
Instructions on the operation of your module can be
found in the chapter "Modules"/"Tool inserts".
Tools
Zünd offers tools for processing the most wide ranging
materials. A selection of important tool inserts can be
found under the corresponding module.
On the Zünd homepage (www.zund.com) you can find
all the current tool inserts or contact your Zünd partner
for detailed information.
Instructions on the operation of your tool/module can
be found in the chapter "Modules"/"Tools".
Tangentially controlled high-performance module for
the following tool inserts:
•POT
•EOT
• DRT
• Various insert sleeves and tool holders