Operating instructions

G3 Series Cleaning and maintenance
Maintenance jobs
7-19
000001,07,12-2008, jmu
7
7.7.7 Cleaning/oiling Y axis guide rails
Tools and materials
# Lubricant for guide rails, bearings
# 4 mm Allen key
# Clean, lint-free rags
Ensure, that following preconditions are fulfilled:
❏ The machine is in the maintenance position.
❏ All modules have been dismantled from the module carriage.
Remove the covers
Fig. 7-9 Remove the covers
⇨ Push the bar forwards
⇨ Remove the safety screws from the ends
Important !
The covers are fastened onto the bar with Velcro.
⇨ Push the module carriage away from the cover
⇨ Remove the cover