Operating instructions

G3 Series Cleaning and maintenance

Maintenance jobs

7-21

000001,07,12-2008, jmu

7.7.8 Lubricating the Y axis bearing

Tools and materials

# Lubricant for guideways

# 4 mm Allen key

# Clean, lint-free rags

# Cardboard base or drip tray

Ensure, that following preconditions are fulfilled:

❏ The machine is in the maintenance position.

❏ All modules have been dismantled from the module carriage.

Lubricate bearing

Fig. 7-11 Lubricate bearing

⇨ Push the module carriage to the right until it stops

⇨ Place a cardboard base or drip tray under the module

⇨ Use the oiler to apply a drop of oil to the lubrication points

⇨ Use a lint-free cloth to remove excess oil from the module carriage