Operating instructions

G3 Series Cleaning and maintenance
Maintenance jobs
7-27
000001,07,12-2008, jmu
7
7.7.13 Conveyor belt
Tools and materials
# Conveyor belt
# Stapler with suitable staples (6 mm)
# Applicator gun
# 2 component adhesive (cartridge)
# Spatula
# Masking tape (2 cm wide)
# Gaffer tape
# Industrial scissors
Ensure, that following precondition is fulfilled:
❏ The machine is switched off.
7.7.13.1 Removing the conveyor belt
Undoing the tensioning screws
Fig. 7-17 Undoing the tensioning screws
⇨ Undo the tensioning screws on both sides
1 Left/right tensioning screws