Operating instructions

G3 Series Product description
Material handling, options
2-9
000003,04,02-2009, jmu
2
2.6.4 Cutter with conveyor
2.6.5 Sheet feeder options
Fig. 2-7 Conveyor
Conveyor systems are used for pulling the materials to
be worked with. The conveyor belt is used as a cutting
base and conveyor belt at the same time.
During the processing, the material to be processed is
fixed in place using a vacuum. After cutting, the bar
moves backwards. The conveyor clamping elements
fix the conveyor belt and the feeding clamps are
pressed onto the material to be pushed forward. The
bar tightens the conveyor belt to the set position.
The shape of the feeding clamps varies depending on
the material to be worked with. An auxiliary drive is
used in the case of larger tables or processing
materials that are heavier for transportation.
Fig. 2-8 Cutter extension
Cutter extensions guarantee efficient working. The
material supply/removal is carried out while the cutter
is completing its jobs. These extensions are available
in different sizes, either with or without auxiliary drive.
Fully-automatic sheet feeding