Operating instructions

G3 Series Product description
Technical information
2-17
000003,04,02-2009, jmu
2
2.8.2 Electrical connection, power consumption
Electrical connection 400 V, 50/60 Hz
1)
only applies for the basic device, the minimum requirement for the mains fuse
increases depending on the vacuum generator
Vacuum generator
For additional data see rating plate/original operating manual in chapter "Additional
specifications"
The vacuum generator is selected according to the following criteria:
– Cutter model
– Desired application
– Local mains voltage and frequency
2.8.3 Environmental conditions
2.8.4 Basic device compressed air
Value Units
Voltage 3-phase, 400
L1, L2, L3, N, PE
V
Mains frequency 50/60 Hz
Power consumption - 3 phases(without
vacuum generator)
3.6 KW
Current consumption, 3 phases(without
vacuum generator)
max. 12 A
Mains fuse, min.
1
16 A
Vacuum generator 1 - 9 KW Value Units
Voltage 3-phase, 400 V
Mains frequency 50/60 Hz
Power consumption - 3 phases 1 - 9 KW
Mains fuse, min.
1
32 A
Vacuum generator 1 - 15 KW Value Units
Voltage 3-phase, 400 V
Mains frequency 50/60 Hz
Power consumption - 3 phases 1 - 15 KW
Mains fuse, min.
1
32 A
Value Unit
Operating temperature + 10 to + 35 °C
Storage temperature - 20 to + 55 °C
Relative humidity 10 - 80, non-
condensing
%
Conveyor feeding clamps Value Units
Operating pressure 0.6 - 0.8 MPa
Min. air flow 20 l/min