Operating instructions

G3 Series Safety
Danger areas
3-9
000011,06,02-2009, jmu
3
3.9.3 Danger area during the installation
Attention !
Risk of injury during the manual initialisation of the tool.
The safety devices are not active during the manual initialisation
• Do not reach into the danger area during the manual initialisation
• Use the automatic initialisation function for the initialisation
Fig. 3-3 Danger area during the installation
Safety distance during the manual initialisation
The safety distance (b) for operating personnel during manual initialisation is 25 cm.
Do not reach into the danger area during the initialisation phase.
1 Danger area
2 Tool (e.g. EOT)
3 Example: Module 2
b Safety distance